Categories

Posts Tagged ‘PIC16F1847’

Programmable relay switch using PIC MCU (revised version)

Thursday, June 30th, 2016

Raj has documented his DIY programmable relay switch using PIC16F1847 microcontroller: Here are the summary of the features that this programmable relay switch has: On-board +5V voltage regulator (operates at 9-15V DC input) OFF and ON time setup for the relay operation Option for cyclic run (maximum 100 cycles, after...

Tags: , ,
Posted in PIC | 4 Comments »

LED display matrix using PIC16F1847 and shift registers

Thursday, May 23rd, 2013

Here's Embedded Lab’s new PIC project:  Making a 8×40 LED matrix marquee using shift registers: This project is about constructing a mono-color LED matrix display board that consists 320 LEDs arranged in 8 rows and 40 columns. The heart of this project is PIC16F1847 microcontroller which receives data from a...

Tags: , ,
Posted in LEDs, PIC | 1 Comment »

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...