Categories

Posts Tagged ‘MachXO2280C’

Using the Bus Blaster to program Lattice CPLDs

Wednesday, January 29th, 2014

Elia writes: One day when playing with the CPLD board I accidentally shorted out two pins on the on-board FT2232 and – unfortunately – the magic smoke escaped! It was very clear that the FT2232 failed because it got very warm when plugging in the USB cable. Luckily the dev...

Tags: , ,
Posted in Bus Blaster, CPLD | 2 Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please