Categories

Posts Tagged ‘LED matrix display’

Wifi enabled 8×64 pixel LED matrix display

Wednesday, September 21st, 2016

Raj over at Embedded Lab has just finished a new project article about Wifi-enabled LED matrix display using ESP8266: This project is a modification of my previous Bluetooth-enabled LED matrix display project, which used 8×64 monochromatic LED matrix (total 512 LEDs) for displaying scrolling text message. The original project used...

Tags: ,
Posted in LEDs, wireless | No Comments »

PIR controlled LED matrix display

Saturday, May 28th, 2011

Sometimes it's handy to have a message display when persons enter a specific area. Having the message appear only when someone approaches brings more attention it, and can be useful for holiday displays, directions or warnings. In this project by Jer from Volts and Bytes, an Atmega8 is used to...

Tags: , ,
Posted in AVR, LEDs, sensors | No Comments »

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...