Posts Tagged ‘Encoder’

Rover 5: encoder speed control

Wednesday, November 27th, 2013

Bajdi writes: I’ve dusted of my Dagu Rover 5 :) While I’ve had my Rover 5 for almost 2 years I’ve never really used the encoders. Unfortunately my Rover 5 was delivered with an encoder that didn’t work right. So I decided to have a look at it and try...

Posted in robotics | No Comments »

Encoder library testing

Thursday, September 26th, 2013

[embed][/embed] Paul over at Dorkbotpdx writes: In a recent forum conversation, it was suggested my Encoder library has only been tested with rotary knobs and "lab" signals, not a high-res encoder turned by a motor, implying it might not work "in the real world".  So I build this little test...

Tags: ,
Posted in library | No Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please