Categories

Posts Tagged ‘Color Analyzer’

Inside a PM1A color analyzer

Monday, January 15th, 2018

Kerry Wong did a teardown of a PM1A color analyzer: As I mentioned in one of my posts a few years back, a color analyzer from the 80’s can be a treasure trove for the hobbyists. And at the very least, it is a cheap way to get yourself a...

Tags: ,
Posted in Teardowns | No Comments »

Reverse engineering a Beseler PM2L Color Analyzer

Tuesday, January 6th, 2015

Kerry Wong wrote an article on reverse engineering a Beseler PM2L Color Analyzer: I recently acquired an old Beseler PM2L color analyzer. This kind of color analyzer was designed to analyze the color or exposure of film negatives at a certain location by comparing the intensity of the filtered light of each...

Tags: , ,
Posted in reversed | No Comments »

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...