Categories

A development board for an STM32G081 MCU

Posted on Thursday, August 8th, 2019 in dev boards by DP

board-built-600

Andy Brown designed and built an STM32G081 development board:

I’ve been an avid user of ST’s F0 series ever since it was launched. The 48MHz Cortex M0 is almost always the perfect MCU for every project that I tend to build and it’s so easy to program and debug that, for me, it’s the default answer to ‘which MCU should I use for this project?’ So when I noticed that ST had launched a ‘G0’ range I just had to have a closer look.

See the detailed writeup and download the Gerber files on Andy’s Workshop.

Check out the video after the break.

This entry was posted on Thursday, August 8th, 2019 at 11:38 pm and is filed under dev boards. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please