Categories

App note: Low Power POE Flyback Converter

Posted on Sunday, July 28th, 2019 in app notes by DP

an_microchip_an50-APID

App note from Microchip about their MIC2145 boost switching regulator to do POE Flayback conversion. Link here (PDF)

The MIC2145 skip mode controller is used to implement a flyback converter that is intended for use in nonisolated, low power, POE applications. The circuit has a nominal 48V input and supports the POE voltage range of 36V to 57V. The output voltage is 2.5V at 350mA.

This entry was posted on Sunday, July 28th, 2019 at 1:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please