Categories

rePalm

Posted on Tuesday, July 23rd, 2019 in ARM by DP

IMG_20190318_143406

rePalm project from Dmitry.GR

As I mentioned, none of the native API of PalmOS 5.x was ever documented. There was a small number of people who figured out some parts of it, but nobody really got it all, or even close to it. To start with, because large parts are not useful to an app developer, and thus attracted no interest. This is a problem, however, if one wants to make a new device. So I had to actually do a lot of reverse engineering for this project – a lot of boring reverse engineering of very boring APIs that I still had to implement. Oh, and I needed a kernel, and actual hardware to run on.

This entry was posted on Tuesday, July 23rd, 2019 at 4:23 pm and is filed under ARM. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please