Categories

App note: Programmable analog functions

Posted on Sunday, July 14th, 2019 in app notes by DP

an_on_AND8413-D

Another app note from ON Semiconductors about various digital potentiometers application. Link here (PDF)

Analog circuits are made programmable by using digital potentiometers (POTs) to vary the key circuit parameters. This application note provides the analog design engineer with basic reference designs and circuit ideas for controlling the key parameters of analog circuits using digital POTs connected to a computer bus or microcontroller. Analog circuits are made programmable by using digital potentiometers (POTs) to vary the key circuit parameters. This application note provides the analog design engineer with basic reference designs and circuit ideas for controlling the key parameters of analog circuits using digital POTs connected to a computer bus or microcontroller.

This entry was posted on Sunday, July 14th, 2019 at 5:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please