Categories

App note: USB On-The-Go (OTG) basics

Posted on Sunday, July 7th, 2019 in app notes by DP

an_cycpress_an65231

USB OTG explained in this app note from Cypress Semiconductors. Link here

This application note discusses several aspects of OTG functionality. The note introduces end-applications and different types of cables and connectors involved with OTG. It also describes the OTG protocol state changes when both Mini-A and Mini-B devices are connected .The host negotiation protocol (HNP) and session request protocol (SRP), which are part of the OTG protocol, are also explained.

This entry was posted on Sunday, July 7th, 2019 at 1:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...