Categories

Solar powered WiFi weather station

Posted on Tuesday, January 29th, 2019 in DIY, tutorials by DP

FT8MXP4JRAYPTP-600

A detailed instructions of how to build this weather station project by Open Green Energy:

This Instructable is a continuation to my earlier weather station project. It was quite popular on the web, people around the globe made their own by following it and given valuable feedbacks for improvement.By taking consideration in to the comments and Q&A section of my earlier project, I decided to make this new version Weather Station.I also made a custom PCB for this project, so any one with little knowledge on electronics circuit can be made this project. My V-2.0 PCB can also be used for many application in Arduino platform. Following are the salient features of new weather station

Project instructables here.

This entry was posted on Tuesday, January 29th, 2019 at 11:00 am and is filed under DIY, tutorials. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please