Categories

App note: Connecting LDOs in parallel

Posted on Sunday, December 30th, 2018 in app notes by DP

an_rohm_parallel_ldo

App note from ROHM semiconductor on combining LDOs for higher load capacity. Link here (PDF)

When you want to increase the output current capacity of an LDO, or when the power dissipation of a single LDO is insufficient, you might think of connecting LDOs in parallel if you need to disperse the dissipation using two LDOs. This application note provides some hints on how to connect LDOs in parallel.

This entry was posted on Sunday, December 30th, 2018 at 1:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Edward Mallon: I've been oversampling those thermistors with the ADC and some pin-toggle noise for a while now, and that method is good. But lately I've been...
  • Marko: armature -> amateur
  • Crawford: Dibs,
  • bill: a sunny Sunday here
  • Iain NoSpam: A very random comment from a very random commenter