Categories

WBR-Oscar regen receiver

Posted on Friday, December 14th, 2018 in DIY, RF by DP

original-600

A nice write-up on Sheldon’s (N6JJA) version of N1BYT’s WBR regenerative receiver:

This article is broken into two parts. First comes the “Oscar” preselector/preamplifier. As I said, I intended it to be either part of the overall receiver or used as a standalone where desired. The second part deals with the WBR upgrades. Both designs were built using the same techniques and I’ve tested both and found that—especially in concert—they do about as well as some of my boat anchors! So if your soldering iron is ready, I’ll start by describing “Oscar.”

Via Dave Richards AA7EE Blog.

This entry was posted on Friday, December 14th, 2018 at 11:43 pm and is filed under DIY, RF. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please
  • Marko: armature -> amateur
  • Crawford: Dibs,