Categories

ESP32 AM radio transmitter

Posted on Friday, October 12th, 2018 in tutorials by DP

am-modulation

A how-to on making a simple AM radio transmitter using the ESP32 microcontroller by Bitluni:

AM Radio transmissions are based on a carrier signal which is modulated by the audio signal. It’s a very basic principle but prone to noise from the environment. Using the ESP32 it is really simple to generate an analog signal using the built-in DACs. With the provided code here just a wire as an antenna has to be connected to the pin 25 of the ESP32. The transmission will end up on the AM frequency ~835kHz.

Via Bitluni’s Lab.

Check out the video after the break.

This entry was posted on Friday, October 12th, 2018 at 11:45 pm and is filed under tutorials. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please
  • Marko: armature -> amateur
  • Crawford: Dibs,