A detailed tutorial on how to set up a cheap QRP monitoring station using an RTL-SDR V3 and a Raspberry Pi 3 from rtl-sdr.com
This tutorial is inspired by dg0opk’s videos and blog post on monitoring QRP with single board computers. We’ll show you how to set up a super cheap QRP monitoring station using an RTL-SDR V3 and a Raspberry Pi 3. The total cost should be about US $56 ($21 for the RTL-SDR V3, and $35 for the Pi 3).
With this setup you’ll be able to continuously monitor multiple modes within the same band simultaneously (e.g. monitor 20 meter FT8, JT65+JT9 and WSPR all on one dongle at the same time). The method for creating multiple channels in Linux may also be useful for other applications. If you happen to have an upconverter or a better SDR to dedicate to monitoring such as an SDRplay or an Airspy HF+, then this can substitute for the RTL-SDR V3 as well.
More details at rtl-sdr.com.