Categories

Attiny85 pogo backpack programmer

Posted on Monday, May 14th, 2018 in Arduino, AVR by DP

ATTINY85 POGO BACKPACK PROGRAMMER

Facelesstech published a new build:

So you are using a bare attiny85 in your next project but don’t have room for the programming header, What do you do? I came up with the idea of using pogo pins layed out on A PCB so that they will sit on top of the Attiny85 legs. I used standard male jumps at each end of the chip to help line it up.

More details on Facelesstech homepage. Project files are available at Github.

Check out the video after the break.

This entry was posted on Monday, May 14th, 2018 at 11:27 pm and is filed under Arduino, AVR. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...