Free PCB Sunday: Pick your PCB

Posted on Sunday, March 11th, 2018 in Free PCBs by DP


We go through a lot of prototype PCBs, and end up with lots of extras that we’ll never use. Every Sunday we give away a few PCBs from one of our past or future projects, or a related prototype. Our PCBs are made through Seeed Studio’s Fusion board service. This week two random commenters will get a coupon code for the free PCB drawer tomorrow morning. Pick your own PCB. You get unlimited free PCBs now – finish one and we’ll send you another! Don’t forget there’s free PCBs three times every week:

Some stuff:

  • Yes, we’ll mail it anywhere in the world!
  • Be sure to use a real e-mail in the address field so we can contact you with the coupon.
  • Limit one PCB per address per month please.
  • Like everything else on this site, PCBs are offered without warranty.
  • PCBs are scrap and have no value, due to limited supply it is not possible to replace a board lost in the post

Be the first to comment, subscribe to the RSS feed.

This entry was posted on Sunday, March 11th, 2018 at 11:12 pm and is filed under Free PCBs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

11 Responses to “Free PCB Sunday: Pick your PCB”

  1. Mikee says:

    One, please

  2. Iain NoSpam says:

    A random comment from a very random commenter. 😀

  3. Kurt says:

    Daylight saving time occurs because Chuck Norris hits snooze on his alarm clock.

  4. Peter says:

    Happy Sunday!

  5. Carlos Orendain says:

    I’ll be happy with a free PCB from Dangerous Prototypes.

  6. Sohan says:

    Hopefully this time lucky

  7. vmorgan says:

    rosin to the core

  8. Bill F says:

    Maybe my day?

  9. hli says:


  10. Bengt says:

    In the mood for a New Project

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Stephen Tinius: Thank you.
  • KH: Ah, the site sells boards, that's the reason. At least it's a XC6SL9 board that does not cost an arm and a leg, though it...
  • Max: While I understand this is more educational than practical in nature, I prefer my edutainment a lot more firmly grounded in economic reality. Sure, you...
  • KH: Using an alkaline coin cell down to 1.0V or under is a very bad idea anyway, unless you as the designer or manufacturer don't care...
  • KH: Farnell says TS1001 is no longer stocked. Not on RS. Digikey says it's obsolete. That said, there are a lot of nanoamp-class parts on sale...