Philips Hue – control anything hack

Posted on Saturday, February 24th, 2018 in hacks by DP


Fred writes:

To be honest, my recent simple relay hack wasn’t really all that great. It just used the high power constant current output to drive a SSR. It wasn’t ideal, but it worked. I decided that it was worth the effort to track down some more useful outputs and properly detect the desired state of the bulb.
All it took was a little bit of poking around and probing the pins of the SAM R21 microcontroller with an oscilloscope. It wasn’t actually that hard. On the B22 bayonet fitting version of the bulb I found some.

More details on his blog here, 0xFRED.

This entry was posted on Saturday, February 24th, 2018 at 2:46 pm and is filed under hacks. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Stephen Tinius: Thank you.
  • KH: Ah, the site sells boards, that's the reason. At least it's a XC6SL9 board that does not cost an arm and a leg, though it...
  • Max: While I understand this is more educational than practical in nature, I prefer my edutainment a lot more firmly grounded in economic reality. Sure, you...
  • KH: Using an alkaline coin cell down to 1.0V or under is a very bad idea anyway, unless you as the designer or manufacturer don't care...
  • KH: Farnell says TS1001 is no longer stocked. Not on RS. Digikey says it's obsolete. That said, there are a lot of nanoamp-class parts on sale...