Categories

App note: The four benefits brought by using NCP12600

Posted on Sunday, February 18th, 2018 in app notes by DP

an_on_AND9682-D

App note discussing extended features of NCP12600, NCP12600 is a multi-mode controller for offline power supplies by ON Semiconductor. Link here (PDF)

Beside the novel multi−mode structure it embarks, the NCP12600 packs a lot of features such as an efficient short−circuit protection architecture, a start−up sequence with a slow switching frequency ramp−up, a fast reset when latched and an auto−recovery scheme when line cycle dropout occurs in latched versions. Let’s discover these novelties in the present application note.

This entry was posted on Sunday, February 18th, 2018 at 1:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please