Categories

Yet another ARM development tutorial

Posted on Tuesday, January 9th, 2018 in ARM, tutorials by DP

armdevelopment-1056x675

ARM development tutorial at smdprutser.nl:

It has been a while since I wrote about ARM development. I recently made a Black Magic Probe (BMP) clone which acts different then the original. The BMP can source power to the target, but on my version control signal is inverted. Not a big deal, but can give unintentional results and has to be fixed. Just for my own memory I wrote down all the steps involved in setting it up and shared it in order to be useful for others.

See the full post on smdprutser blog.

This entry was posted on Tuesday, January 9th, 2018 at 11:16 pm and is filed under ARM, tutorials. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • gant: They still have a couple of the more expensive (but still considerably cheap) 5S-I-S01 in stock...
  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!