Categories

PIC18 four-channel DMX relay controller

Posted on Thursday, October 26th, 2017 in PIC by DP

image1

Glen Akins has a nice build log on his four channel DMX-controlled relay, that is available on GitHub:

 Halloween was right around the corner and I needed a timer with a bunch of relays to trigger some store-bought props and a fog machine periodically. (Mental note: read fog machine specs carefully—not all come with timer remotes.) My first thought was an Arduino and cheap relay board. Second thought was to build something with a micro and some relays. Third thought was that if I’m going to build something, might as well add DMX and package it up into a neat enclosure. Hence, the four channel DMX-controlled relay project was born.

See the full post on his blog.

This entry was posted on Thursday, October 26th, 2017 at 9:55 pm and is filed under PIC. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please