Categories

App note: Driving of OLEDs

Posted on Sunday, April 16th, 2017 in app notes by DP

an_osram_oled_driving

Application note from OSRAM on driving OLEDs with constant current for longer operation. Link here

The operation of OLEDs with electronic drivers is similar to anorganic LEDs for the most part. In a majority of applications, standard LED drivers may be used also for OLEDs. Nevertheless, there are some important basic rules and OLED specific characteristics, that have to be considered.

This entry was posted on Sunday, April 16th, 2017 at 1:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Edward Mallon: I've managed to get cheap thermistors calibrated to about to +/- 0.2C with 3.3v Arduinos. https://edwardmallon.wordpress.com/2017/04/26/calibrating-oversampled-thermistors-with-an-arduino/ Instead of playing whack-a-mole with the various sources of...
  • Ja: What the keyer do? Sends random morse code or there is some input? If someone can point me to some source to read I would...
  • Sorin: Pleasure of free!
  • hli: Sunday++
  • Max: Jolly good stuff, although the "include 100 W resistors in series with the inputs and outputs" part is quite hilarious until one realizes* they meant...