Categories

Homebrew PiHPSDR

Posted on Monday, April 3rd, 2017 in DIY, R-Pi by DP

pihpsdr_rp

g4fre built his own PIHPSDR, that is available at github:

Having seen the Apache-labs version of the PIHPSDR I wanted to customise it to fill my needs, so I needed to build my own
All the needed information , with the software, is at John Melton’s github site github.com/g0orx/pihpsdr The hardware shopping list includes. RaspberryPi 3, 7″ Official Raspberry Pi LCD, 8 push buttons, 4 rotary encoders, case and power supply.
All the items were mounted in a 12x7x2″ aluminium case obtained from Mouser, The display was held in place with plastic channel finishing strips from B&Q.

More details at g4fre radio blog.

This entry was posted on Monday, April 3rd, 2017 at 10:42 pm and is filed under DIY, R-Pi. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please
  • Marko: armature -> amateur
  • Crawford: Dibs,