Categories

Minstrel ZX80 clone

Posted on Tuesday, January 3rd, 2017 in DIY by DP

pics-Minstrel ZX80 Clone-600

Dave Curran has a nice build log on his ZX80 clone, which he call Minstrel:

Here is a new ZX80 clone that I have called the Minstrel. It is a fairly accurate clone electrically to the ZX80, using the same chips and the original schematic with only a few concessions to the modern world. All the parts are the same, the part numbers and pins are the same, other than the ROM and RAM, I’ve only added a few extra decoupling capacitors and a one resistor / one transistor composite video amplifier.

More info at Tynemouth Software blog.

This entry was posted on Tuesday, January 3rd, 2017 at 3:28 pm and is filed under DIY. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Pekka Akselin: This is ridiculous!? :-) We are back at 256(!) byte EPROMs that needed multiple, a handful, of voltages to run! :-(
  • KH: Let's try a back-of-envelope calc balancing energies. From MCP1700 datasheet, there are graphs for a 200mA load step. Estimate the energy shortfall as 12uJ. Say...
  • Daniel: It's been a week and my comment is still awaiting moderation. Apparently the CIA doesn't want their involvement known?
  • KH: Agree, so okay, I guess he must have learned from somewhere. 100nF and 1000uF is so far apart, that was jarring; it's more magic incantation...
  • Max: I have a suspicion the hefty electrolytic cap might be some sort of cargo cult carry-over from other RF-based projects - for instance, I've seen...