Categories

App note: Temperature compensation for LCD displays

Posted on Sunday, February 28th, 2016 in app notes by DP

an_hantronix_tempcomp

For over the normal range temperature, Hantronix presents a simple temperature compensation circuit to correct LCD contrast, Link here (PDF)

The optimal contrast setting for LCD displays varies with ambient temperature. For most applications this variation in contrast is tolerable over the “normal” temperature range of 0°C to +50°C. Most Hantronix LCD modules are available with an extended temperature range option which allows the display to operate from -20°C to +70°C. The changes in contrast are NOT usually tolerable over this wide a range of temperatures, which means a way of adjusting the contrast voltage as the ambient temperature changes must be provided.

As the temperature decreases the LCD fluid requires a higher operating voltage in order to maintain a given optical contrast. One way to provide for this is to give the user control of the contrast. This is a simple solution but quite often its not desirable or practical.

This entry was posted on Sunday, February 28th, 2016 at 1:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please