Hatching chicks in a hacked mini fridge

Posted on Monday, September 28th, 2015 in hacks by DP


Do you need an incubator for hatching eggs?  avgfitfreak shows you how to easily make a DIY egg incubator out of an unused Monster drink refrigerator:

Since an incubator needs to be hot not cold, I installed a piece of heat tape (aka – heat mat for reptiles). This was taped onto the back wall behind the false wall (which unscrewed with a handful of screws). As a refrigerator the fan would pull air over the cool coils behind the false wall to cool the air. Now the coils were replaced with heat tape and the air will be warmed.
Who knows how hot heat tape will get if just plugged into the wall (I am sure someone does but not me)? To control how hot my incubator will get I plugged the heat tape into this thermostat I had laying around. It is designed for reptiles and has a temperature probe which I fed into the inside of the incubator.

Project info at  avgfitfreak ‘s Imgur.  Reddit discussion here.

Via Make.

This entry was posted on Monday, September 28th, 2015 at 11:30 pm and is filed under hacks. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Hatching chicks in a hacked mini fridge”

  1. Sleepwalker3 says:

    Does this mean they’ll be Monster chicks that hatch?

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Paul Robertson: Count me in
  • Chris Jennings: I too like the cold and snow (it means no grass mowing). Now I can focus on fun stuff like hobby boards and woodworking.
  • flubba86: Commenting for fun and profit.
  • Sohan: If wishes were PCBs, beggars would be soldering!
  • Luke: Neat