Categories

PIC32 Tic-Tac-Toe: Demonstration of using touch-screen, TFT and the Protothreads threading library

Posted on Monday, August 3rd, 2015 in PIC by DP

2

Tahmid writes:

I had previously used the Adafruit TFT display using my library (ported from the Adafruit Arduino library). I decided to optimize the library to improve drawing speed. The same display I use comes with a 4-wire resistive touch-screen as well. I decided to write a simple library for the touch-screen and give Protothreads a try. To incorporate all this, I thought it would be cool if I used these to make a simple game. Tic-tac-toe came to mind as a fun little demo.

Project info at Tahmid’s blog.

Check out the video after the break.

This entry was posted on Monday, August 3rd, 2015 at 1:44 pm and is filed under PIC. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please