Categories

TruPlay- Hacking into an OVC3860 based bluetooth A2DP adapter using the MSP430

Posted on Monday, July 6th, 2015 in hacks, MSP430 by DP

TruPlay

TruPlay –  controlling bluetooth A2DP devices using MSP430and OVC3860  from Rohit Gupta:

I wanted it to 3D Print a new case but couldn’t so, made a PCB that would sit on the Top of the adapter and command it. I was lucky to have a 3.3V Regulator inside the adapter so, an extra regulator was not required. For the project i used the MSP430G2553 microcontroller in a TSSOP20 package running @ 16Mhz and programmed using Energia! I added some standard condiments like a LED and an extra SMD tactile switch to further expand capabilities.

Project details at Rohit Gupta’s blog.

Check out the video after the break.

This entry was posted on Monday, July 6th, 2015 at 10:59 pm and is filed under hacks, MSP430. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please