Categories

8×8 RGB LED array with a Raspberry Pi

Posted on Thursday, February 26th, 2015 in LEDs, R-Pi by DP

8860led

Bob Davis has been working on an 8×8 RGB LED array with a Raspberry Pi project:

I have been working on a book of Raspberry Pi projects. One of the projects is an 8×8 three color LED array. I picked up some more of them on eBay lately and they had a different pin-out.
The MEU 8860 RGB pin-out as seen from above. I use Dx for the rows as Rx is used for Red.

Check out the video after the break.

This entry was posted on Thursday, February 26th, 2015 at 1:00 pm and is filed under LEDs, R-Pi. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please