Categories

PIR sensor

Posted on Thursday, August 14th, 2014 in security, sensors by DP

photo_th

An automatic PIR sensor project by Rajkumar Sharma of Electronics Lab:

Project is based on Holtek’s IC HT7610A, which is a CMOS LSI chip designed for use in automatic PIR lamp, flash or buzzer control. It can operate in 3-wire configuration for relay applications. In our project we have used relay instead of Traic to connect any kind of load in output, HT7610B IC is suitable for traic and HT7610A for Relay application. The chip is equipped with operational amplifiers, a comparator, timer, a zero crossing detector, control circuit, a voltage regulator, a system oscillator, and an output timing oscillator.
Its PIR sensor detects infrared power variations induced by the motion of a human body and transforms it to a voltage variation. If the PIR output voltage variation conforms to the criteria (refer to the functional description), the lamp is turned on with an adjustable duration. The circuit doesn’t required step down transformer and can work directly by applying 110V AC or 220V AC (Capacitor C7 needs to change for 220V AC (0.33uF/275V) and 110V AC (0.68uF/275V)

This entry was posted on Thursday, August 14th, 2014 at 9:00 pm and is filed under security, sensors. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Crawford: Biscuits!
  • hli: Sunday++
  • Jack: Hello! Any board relating to LC filter circuits?
  • Fabien: PCB is life, life is PCB.
  • Kurt: We sleep safely at night because rough men stand ready to visit violence on those who would harm us. (Rough women, too.)