Categories

Bus Pirate v3.8 free PCB build

Posted on Friday, May 2nd, 2014 in builds by DP

2014-04-29 22.55.56

Olivier Chatelain posted picture of his free Bus Pirate v3.8 PCB build.  The Bus Pirate is an open source hacker multi-tool that talks to electronic stuff.

If you build a free PCB we’ll send you another one! Blog about it, post a picture on Flicker, whatever – we’ll send you a coupon code for the free PCB drawer.

Get your own handy Bus Pirate for $30, including world-wide shipping. Also available from our friendly distributors.

Via the contact form.

BusPirateRealterm

This entry was posted on Friday, May 2nd, 2014 at 7:09 pm and is filed under builds. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

3 Responses to “Bus Pirate v3.8 free PCB build”

  1. gwideman says:

    OK, now I’m really confused. This post talks about BP v3.8, points to an article that mentions the v3b update and also links to a seeed page selling v3.6.

    What is the most recent and/or recommended version in the BP 3.x line, and is it about to be superseded (or would that be superseeeded)? Thanks!

  2. Gibo says:

    Nice PCB to Free!

  3. gwideman says:

    And while we are on the subject of Bus Pirate, what’s the status of BP LCD adapter V3a, with the added 2×8 header? Did that ever make it to production? I couldn’t find it in the seeed store.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Sjaak: In theory the buspirate can also do SWD or JTAG as it just wiggling some pins. I dunno if the speed and memory is sufficient...
  • Drone: Aw, how-come Bus-Pirate can't do all this too?
  • Siddharth: Grate
  • jeanmarc78: hello
  • KH: So I guess, don't mind us dinosaurs too much. Someone like me will get triggered by some of the things Arduino folks do. There's just...