N1KSN Iambic Keyer free PCB build

Posted on Thursday, February 6th, 2014 in builds by DP


Marcello posted picture of his free Iambic Keyer PCB build, a guest PCB from Andy Palm/N1KSN

If you build a free PCB we’ll send you another one! Blog about it, post a picture on Flicker, whatever – we’ll send you a coupon code for the free PCB drawer.

This entry was posted on Thursday, February 6th, 2014 at 2:30 pm and is filed under builds. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

5 Responses to “N1KSN Iambic Keyer free PCB build”

  1. g says:

    Complete with the xtal pad screwup :) (

    But good to see someone actually using it.

  2. Adnc says:

    This is simply not possible. I took part for more than 16 weeks, but never had “luck” getting one of these coupon codes.

  3. Chas says:

    Seems like a little bad luck? I’ve received a coupon code.

  4. Xykon says:

    I had to go to YouTube to actually find out what an Iambic Keyer does. I certainly wasn’t aware Morse code was still used that much… might be interesting to design a serial terminal Morse code translator for those who don’t speak it fluently… :)

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Nathan Johnson: 100 channels. Not many are legal in any given area. Be sure to comply with local laws.
  • William Brodie-Tyrrell: It's getting to the point where it's cheaper and definitely easier to use a Pi Zero or similar and a $20 3G USB dongle. Power...
  • KH: IIRC most of the actual operating system of modern HDDs is in one of the platter(s); the stuff on the 25VF010 is a bootup firmware......
  • Trev: I don't know of any inexpensive 3G modules (prices start around $US 50), but it does explain why 2G modules are relatively inexpensive by comparison....
  • Zonie: This site Rocks!