Bus Pirate v4 reference sheet

Posted on Monday, January 27th, 2014 in Bus Pirate, pin reference by DP


Graham242 shared this Bus Pirate v4 reference sheet he made in the forum:

This was the one I’d put together for the Bus Pirate V4 for the Seeed cable…
As I found the SVG, I’ve uploaded – then you can change it if need be.

This entry was posted on Monday, January 27th, 2014 at 1:00 pm and is filed under Bus Pirate, pin reference. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please