Categories

The Tesseract build, Part II

Posted on Monday, December 30th, 2013 in LEDs by DP

tesseract_blue_0006-6

Kevin Rye posted an update on his Tesseract, we wrote about it previously.

With the software and hardware for the Tesseract complete, it was time to wrap up the enclosure.

This entry was posted on Monday, December 30th, 2013 at 7:00 pm and is filed under LEDs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “The Tesseract build, Part II”

  1. Tom P. says:

    It looks good! I reckon you were right to go for the mellow fading.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • KH: A power-off current draw of 4mA for the Sony A6000 is a defect, product recall territory. It hits the camera battery with unacceptable wear and...
  • KH: Hydroponics is like home automation. Every year you have folks who start projects like these and think it will take off and become a big...
  • KH: Read the linked article. The A6000 has an unusually high standby/sleep current. The adapter's quiescent current is not an issue, but the A6000 sleep current...
  • Drone: Jeez, the very limited DCA: 40A/400A±3.0% capability, no RMS at all, and the CAT=DEATH rating makes this a NO BUY at any price - much...
  • Drone: Back-Story... Quoting: "HydroBot is a modular control system for automating hydroponic gardens." More about it here: http://protofusion.org/wordpress/2016/07/hydrobot/ Interesting work. But I would like to see...