App note: LCD biasing and contrast control method

Posted on Saturday, December 14th, 2013 in app notes by DP


Application note on direct Liquid crystal display driving using PIC microcontrollers.

This Application Note provides methods that can be used to provide biasing voltages for Liquid Crystal displays. This document covers most of the biasing methods used in the PIC microcontrollers with an LCD controller.

This entry was posted on Saturday, December 14th, 2013 at 5:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Stephen Tinius: Thank you.
  • KH: Ah, the site sells boards, that's the reason. At least it's a XC6SL9 board that does not cost an arm and a leg, though it...
  • Max: While I understand this is more educational than practical in nature, I prefer my edutainment a lot more firmly grounded in economic reality. Sure, you...
  • KH: Using an alkaline coin cell down to 1.0V or under is a very bad idea anyway, unless you as the designer or manufacturer don't care...
  • KH: Farnell says TS1001 is no longer stocked. Not on RS. Digikey says it's obsolete. That said, there are a lot of nanoamp-class parts on sale...