PIC based wristwatch project

Posted on Monday, August 26th, 2013 in DIY, PIC by DP


exapod shared his PIC based wirst watch project in the forum:

i’m building a PIC based wrist watch with a sharp memory lcd as the screen. it has an accelerometer, 4 push button,rgb led for the backlight, a micro usb connector for charging the lipo and a an 18 bit adc for fuel gauge.The pic is a PIC24FJ64GA102.

This entry was posted on Monday, August 26th, 2013 at 1:00 pm and is filed under DIY, PIC. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

2 Responses to “PIC based wristwatch project”

  1. DP. says:

    fixed thanks.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Stephen Tinius: Thank you.
  • KH: Ah, the site sells boards, that's the reason. At least it's a XC6SL9 board that does not cost an arm and a leg, though it...
  • Max: While I understand this is more educational than practical in nature, I prefer my edutainment a lot more firmly grounded in economic reality. Sure, you...
  • KH: Using an alkaline coin cell down to 1.0V or under is a very bad idea anyway, unless you as the designer or manufacturer don't care...
  • KH: Farnell says TS1001 is no longer stocked. Not on RS. Digikey says it's obsolete. That said, there are a lot of nanoamp-class parts on sale...