TP-Link WR703n as telemetry link and camera broadcasting tutorial

Posted on Thursday, December 13th, 2012 in DIY, wireless by DP


Here is a guide on how to setup the cheap TP-Link WR703n router to act as a telemetry link and an USB camera broadcasting server. The guide is in three parts, starting from flashing the OpenWrt firmware, adding a USB hub and extending the memory with a USB flash drive, and finishes with explaining how to attach a camera.


This entry was posted on Thursday, December 13th, 2012 at 11:00 am and is filed under DIY, wireless. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Stephen Tinius: Thank you.
  • KH: Ah, the site sells boards, that's the reason. At least it's a XC6SL9 board that does not cost an arm and a leg, though it...
  • Max: While I understand this is more educational than practical in nature, I prefer my edutainment a lot more firmly grounded in economic reality. Sure, you...
  • KH: Using an alkaline coin cell down to 1.0V or under is a very bad idea anyway, unless you as the designer or manufacturer don't care...
  • KH: Farnell says TS1001 is no longer stocked. Not on RS. Digikey says it's obsolete. That said, there are a lot of nanoamp-class parts on sale...