Raspberry Pi stackable Arduino compatible board

Posted on Monday, August 27th, 2012 in Arduino, dev boards by DP

Osbock let us know about his Raspberry Pi stackable Arduino compatible board design. An Arduino is gently introduces to a Raspberry Pi header. Most will find the UART connection the easiest way to communicate between the boards.

A header is available for the Fastrax UP501 GPS, DS3234 real time clock, Micro-SD card slot, and a row of servo headers connected to the PWM outputs.

Via the forum.

This entry was posted on Monday, August 27th, 2012 at 9:00 pm and is filed under Arduino, dev boards. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Drone: The LM7171 used in this very simple design can be simulated in LTspice with reasonable results at 10MHz using the non-encrypted PSPICE model from TI...
  • Jon Jackson: I would be interested in 1 or 2 of your circuit boards. Jon
  • Max: An actual Saturday "detector" built with the same hardware would use the precisely timed slightly varying length of the day (and some built-in astronomy data)...
  • KH: In the old days, these things remained on paper forever as whimsical scrawls. Today, they are brandished about on blogs for the entire world to...
  • KH: So he doesn't really know what he's doing. Yawn. It's sensor-controlled. It's not an oscillator. A leaf covers the window, you're toast. TLV3702? Overkill. The...