Categories

Controlling a camera with the Bus Pirate

Posted on Tuesday, July 17th, 2012 in Bus Pirate, tutorials by DP

Hacromatic posted a tutorial on interfacing an Arduino camera module with the Bus Pirate:

The Bus Pirate from Dangerous Prototypes is one of my favorite debugging tools. It’s a really handy gadget for probing and poking around on various communications buses to get an understanding of how to interface to new chips or devices. It has a large set of features but I want to zoom in a bit and talk about I2C and how to use the Bus Pirate to talk to the HacroCam.

Via the contact form.

Get an assembled Bus Pirate for $30, including world-wide shipping. Also available from our friendly distributors.

This entry was posted on Tuesday, July 17th, 2012 at 7:00 pm and is filed under Bus Pirate, tutorials. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Sjaak: In theory the buspirate can also do SWD or JTAG as it just wiggling some pins. I dunno if the speed and memory is sufficient...
  • Drone: Aw, how-come Bus-Pirate can't do all this too?
  • Siddharth: Grate
  • jeanmarc78: hello
  • KH: So I guess, don't mind us dinosaurs too much. Someone like me will get triggered by some of the things Arduino folks do. There's just...