Categories

Complete energy-harvesting and power-management chip

Posted on Monday, June 25th, 2012 in app notes by DP

An app note on a MAX17710 energy-harvesting charger and protector:

Maxim Integrated Products introduces the MAX17710, the industry’s first IC to integrate all of the power-management functions for ambient energy harvesting, as well as for charging and protecting micro-energy cells (MECs), a form of solid-state battery. Operating at an ultra-low current level, the MAX17710 accepts energy from a variety of poorly regulated energy harvesting sources with output levels ranging from 1µW to 100mW. Examples include light (captured by photovoltaic cells), vibration (captured by a piezoelectric element), heat (captured by a thermoelectric generator), and RF (e.g., near-field communications (NFC)). The MAX17710 integrates a programmable input boost regulator and needs no expensive external components to charge a MEC with energy sources as low as 0.8V. It protects the MEC by using a linear shunt-series regulator. An ultra-low-quiescent current, adjustable low-dropout linear regulator (LDO) with selectable voltages of 3.3V, 2.3V, or 1.8V allows the MAX17710 to adapt to a variety of loads. Packaged in a low-profile 0.5mm TQFN, it enables a new class of thin, card-like applications. The IC will also be available in wafer form to enable even thinner form factors. The MAX17710 is targeted for powered smart cards, real-time clock (RTC)/memory backup applications, and wireless sensor networks. Examples of wireless sensor networks include remote applications like irrigation valve control, building energy management, machine monitoring systems, asset tracking, biometric security systems, medical applications, and a myriad of portable consumer electronics.

Thanks rsdio. Via the forum.

This entry was posted on Monday, June 25th, 2012 at 2:20 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Max: Hey, good job quoting as an abstract something the author writes about someone else's project... For the record, I do appreciate the proper attention to...
  • imqqmi: Also interesting to note that arduino's use the DTR signal to reset the device. I found this out because repetier was able to do this...
  • Kevin: A bit sad that you are using a knock off Saleae device unless you are not using Saleae software.
  • Max: For the Haxxor Edition he could add a Morse-to-scan-code translator to the code in the PIC (where the L337 Haxxor Special also accepts Unicode code...
  • KH: Someone with a PIC16F1459 project, well you don't see these every day. Methinks he repeats the USB 2.0 thing too much; this might mislead people...