App note: MSP430 based USB Li-Ion battery charger with fuel gauge

Posted on Sunday, June 24th, 2012 in app notes by DP

An MSP430-based USB Li-Ion battery charger with a fuel gauge:

The example cases discussed in this application report provide a basic understanding of what needs to be done at production, as well as on the application level, to achieve the aforementioned goals. The associated software provides library functions to interface and communicate with the bq27410 fuel gauge, applicable to any USB-equipped MSP430 device. The software also includes a demo application that integrates the USB stacks and the fuel gauge library functions to read the battery information from the fuel gauge and transmit it to the PC through USB Communications Device Class (CDC).

This entry was posted on Sunday, June 24th, 2012 at 1:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

2 Responses to “App note: MSP430 based USB Li-Ion battery charger with fuel gauge”

  1. Sleepwalker3 says:

    Link just goes to a blank TI page :(

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Nathan Johnson: 100 channels. Not many are legal in any given area. Be sure to comply with local laws.
  • William Brodie-Tyrrell: It's getting to the point where it's cheaper and definitely easier to use a Pi Zero or similar and a $20 3G USB dongle. Power...
  • KH: IIRC most of the actual operating system of modern HDDs is in one of the platter(s); the stuff on the 25VF010 is a bootup firmware......
  • Trev: I don't know of any inexpensive 3G modules (prices start around $US 50), but it does explain why 2G modules are relatively inexpensive by comparison....
  • Zonie: This site Rocks!