Categories

App note: USB/UART/Ethernet/SD card bootloader for PIC32 microcontrollers

Posted on Saturday, June 2nd, 2012 in app notes by DP

A PIC32 bootloader that supports about every update channel possible: UART, USB-HID, USB-MSD, Ethernet, or SD cards.

This application note describes how to use bootloader to upgrade firmware on PIC32 devices without the need for an external programmer or debugger. The source code consists of following implementations of bootloader, 1) UART 2) USB device based on HID class 3) USB host based on MSD class 4) Ethernet 5) SD card

This entry was posted on Saturday, June 2nd, 2012 at 9:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Dave B: Got two of them. If you let the battery run flat, they don't charge! You have to pull the battery, and get enough charge in...
  • Bill F: My turn?
  • Chris: Ok!
  • Bob: Free PCB for me!
  • Blars: Yet another meaningless comment.