Categories

Lattice CPLD development board free PCB built

Posted on Thursday, March 29th, 2012 in builds by DP

Colfaxmingo built a free Lattice CPLD development board PCB. CPLDs are programmable logic gate arrays which allow you to build custom logic devices by programing them.

If you build a free PCB we’ll send you another one! Blog about it, post a picture on Flicker, whatever – we’ll send you a coupon code for the free PCB drawer.

Via the forum.

This entry was posted on Thursday, March 29th, 2012 at 11:00 am and is filed under builds. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Lattice CPLD development board free PCB built”

  1. Kevin says:

    At first glance, I thought it was a 3d render :)

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • KH: A power-off current draw of 4mA for the Sony A6000 is a defect, product recall territory. It hits the camera battery with unacceptable wear and...
  • KH: Hydroponics is like home automation. Every year you have folks who start projects like these and think it will take off and become a big...
  • KH: Read the linked article. The A6000 has an unusually high standby/sleep current. The adapter's quiescent current is not an issue, but the A6000 sleep current...
  • Drone: Jeez, the very limited DCA: 40A/400A±3.0% capability, no RMS at all, and the CAT=DEATH rating makes this a NO BUY at any price - much...
  • Drone: Back-Story... Quoting: "HydroBot is a modular control system for automating hydroponic gardens." More about it here: http://protofusion.org/wordpress/2016/07/hydrobot/ Interesting work. But I would like to see...