Categories

2011 DCC – Practical Software Radio

Posted on Saturday, March 3rd, 2012 in open source, RF, talks by the machinegeek


This talk is from the 2011 Digital Communications Conference (DCC) held last September in Baltimore, MD. The speaker is Matt Ettus who heads up Ettus Research, manufacturers of the USRP family of SDRs. His talk is an in depth technical explanation of “Why Things Don’t Always Match the Textbooks” in SDR. Matt is affiliated with the open source GNU Radio Project, and hold Amateur Radio License N2MJI.

This entry was posted on Saturday, March 3rd, 2012 at 4:00 pm and is filed under open source, RF, talks. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “2011 DCC – Practical Software Radio”

  1. rsdio says:

    Useful. The content was largely basic, but the coverage went deep enough to reveal a few juicy details.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please