Categories

Processing + Arduino + touchOSC

Posted on Saturday, January 28th, 2012 in Arduino, LEDs, open source, Processing by the machinegeek


Adrianmb from Make-a-tronik has written a tutorial on how to how to communicate between your mobile device (Android / iOS device) or a PC and Arduino through a protocol known as OSC (Open Sound Control). The project uses Processing, Arduino, and an LED RGB device. TouchOSC must be installed on the computer or iDevice you intend to use as the control interface. The video shows his demo controlling an RGB LED attached to an Arduino by using slider controls on a computer using an interface constructed with TouchOSC. (The Arduino communicates via serial with Processing which uses the oscP5 library to interface with TouchOSC.) He describes: “We will create a custom template with TouchOSC editor, which we use as a control to vary the intensity of an RGB LED and color combinations to create, we will open a communication link between processing and TouchOSC, finally send all information received to an Arduino board connected to the serial port and see the result obtained in the RGB LED.”

You can read the complete English translation of Adrianmb’s article on the Make-a-tronik website.

Via the contact form.

This entry was posted on Saturday, January 28th, 2012 at 5:27 pm and is filed under Arduino, LEDs, open source, Processing. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Processing + Arduino + touchOSC”

  1. Steve says:

    $4.99 on the App Store, no thanks.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Dave B: Got two of them. If you let the battery run flat, they don't charge! You have to pull the battery, and get enough charge in...
  • Bill F: My turn?
  • Chris: Ok!
  • Bob: Free PCB for me!
  • Blars: Yet another meaningless comment.