Categories

Read and write 13.56 MHz RFID cards

Posted on Wednesday, January 4th, 2012 in RFID by DP

Read and write 13.56 MHz RFID cards with OpenPCD:

OpenPCD is a free hardware design for Proximity Coupling Devices (PCD) based on 13,56MHz communication. This device is able to screen informations from Proximity Integrated Circuit Cards (PICC) conforming to vendor-independent standards such as ISO 14443, ISO 15693 as well as proprietary protocols such as Mifare Classic. Contactless cards like these are for example used in the new electronic passports.

Thanks Shadyman! Via the forum.

This entry was posted on Wednesday, January 4th, 2012 at 1:00 pm and is filed under RFID. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Read and write 13.56 MHz RFID cards”

  1. Shadyman says:

    Well that was a fairly unexpected occurrence of my nickname in a blog post. Digging through the archives, Ian? ;)

    I’d still like to see someone like Seeed produce some of these as they are open designs :)

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Max: Hey, good job quoting as an abstract something the author writes about someone else's project... For the record, I do appreciate the proper attention to...
  • imqqmi: Also interesting to note that arduino's use the DTR signal to reset the device. I found this out because repetier was able to do this...
  • Kevin: A bit sad that you are using a knock off Saleae device unless you are not using Saleae software.
  • Max: For the Haxxor Edition he could add a Morse-to-scan-code translator to the code in the PIC (where the L337 Haxxor Special also accepts Unicode code...
  • KH: Someone with a PIC16F1459 project, well you don't see these every day. Methinks he repeats the USB 2.0 thing too much; this might mislead people...