Getting started with the STM32F4-Discovery board and ChibiOS/RT

Posted on Thursday, December 1st, 2011 in dev boards, site by the machinegeek

Giovanni writes to inform us about his guide regarding the STM32F4-Discovery.

This article will explain how to get started with the recently released STM32F4-Discovery board using ChibiOS/RT. This board is really cheap (below $20) and is an excellent evaluation platform for the STMicroelectronics Hi-Performance & DSP STM32F4 family.

Via the contact form.

This entry was posted on Thursday, December 1st, 2011 at 8:02 pm and is filed under dev boards, site. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

2 Responses to “Getting started with the STM32F4-Discovery board and ChibiOS/RT”

  1. arhi says:

    :D :D :D :D :D :D

  2. TitanMKD says:

    I just bought on of this cheap card ;-) for an other future project.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Nathan Johnson: 100 channels. Not many are legal in any given area. Be sure to comply with local laws.
  • William Brodie-Tyrrell: It's getting to the point where it's cheaper and definitely easier to use a Pi Zero or similar and a $20 3G USB dongle. Power...
  • KH: IIRC most of the actual operating system of modern HDDs is in one of the platter(s); the stuff on the 25VF010 is a bootup firmware......
  • Trev: I don't know of any inexpensive 3G modules (prices start around $US 50), but it does explain why 2G modules are relatively inexpensive by comparison....
  • Zonie: This site Rocks!