Posted on Tuesday, November 29th, 2011 in code, open source, RFID by the machinegeek

RFIDIOt, which stands for RFID IO Tools, is an open source Python library for exploring RFID devices. It is intended to work with a range of LF and HF RFID reader hardware including both serial and PCSC devices. It’s the work of Adam Laurie, a Director of the security research and consultancy company Aperture Labs Ltd.

Read the details about RFIDIOt tools at the documentation page, and download the code here.

This entry was posted on Tuesday, November 29th, 2011 at 3:58 pm and is filed under code, open source, RFID. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

2 Responses to “RFIDIOt: RFID IO tools”

  1. Sjaak says:

    Nice projectname !

  2. rsdio says:

    are you sure it doesn’t stand for Radio Frequency Idiot?

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Stephen Tinius: Thank you.
  • KH: Ah, the site sells boards, that's the reason. At least it's a XC6SL9 board that does not cost an arm and a leg, though it...
  • Max: While I understand this is more educational than practical in nature, I prefer my edutainment a lot more firmly grounded in economic reality. Sure, you...
  • KH: Using an alkaline coin cell down to 1.0V or under is a very bad idea anyway, unless you as the designer or manufacturer don't care...
  • KH: Farnell says TS1001 is no longer stocked. Not on RS. Digikey says it's obsolete. That said, there are a lot of nanoamp-class parts on sale...