Categories

Controllable aquarium moonlight strip

Posted on Monday, October 10th, 2011 in DIY, LEDs by DP

Theatrus build a controllable aquarium moonlight strip. Royal-blue Osram high power surface mount LEDs provide the lighting, and an ATmega88 the control. RS485 port is used for control. All of the design files should be available shortly.

Its quite potent (visible with the main 6x80W T5s running). Its easy to mount (a handful of command strips have held two up next to T5s for over a year). Its fully dimmable and controllable.

Via the forum.

This entry was posted on Monday, October 10th, 2011 at 10:00 pm and is filed under DIY, LEDs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Drone: So these go for around $330 USD and NO published calibration procedure online or otherwise? Given what's inside - I don't think I'll be considering...
  • Pekka Akselin: This is ridiculous!? :-) We are back at 256(!) byte EPROMs that needed multiple, a handful, of voltages to run! :-(
  • KH: Let's try a back-of-envelope calc balancing energies. From MCP1700 datasheet, there are graphs for a 200mA load step. Estimate the energy shortfall as 12uJ. Say...
  • Daniel: It's been a week and my comment is still awaiting moderation. Apparently the CIA doesn't want their involvement known?
  • KH: Agree, so okay, I guess he must have learned from somewhere. 100nF and 1000uF is so far apart, that was jarring; it's more magic incantation...