Categories

Do it yourself heart monitor

Posted on Wednesday, July 20th, 2011 in sensors by Ian

victzh posted picture of his DIY ECG using an Xprotolab mini-scope/logic analyzer in the project log forum.

Some time ago I bought an excellent toy – Xprotolab mini-scope/logic analyzer by Gabriel Anzziani.

I touched it signal legs, and immediately saw that it picks up 60Hz through my body. I looked around and found couple of simple and inexpensive ECG projects, which definitely could use such a nice mini-scope.

Via the forum.

This entry was posted on Wednesday, July 20th, 2011 at 1:00 pm and is filed under sensors. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Do it yourself heart monitor”

  1. Javier says:

    Hello Friend I can send to my email the entire project interests me please I have the xprotlab thanks

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please